Special Offer BeneluxDecor TkRom INTERIOR PAINT CLASS 2 TK200, wholesale Supreva, Tkrom, Premium, News, Promotions, Produced in Europe

Description Matt plastic paint based on aqueous acrylic dispersion. Improved formula that minimizes splatter caused by roller painting.roller painting. Excellent balance between application, coverage, performance and washability. Suitable for professional use. Low VOC ́S and ammonia-free. EPD - DAPA certified paint This documentation can be used to obtain building sustainability certifications such as LEED or BREEAM. Please refer to the EPD - DAP certificate in the product's technical documentation.Available in tintometricAvailable in anti-mold versionField of applicationDecorative interior coating, suitable for plaster mortars, plasterboard, concrete, fiber cement and other building materials. Both for new construction and for maintenance. It has a pleasant smell that allows it to quickly inhabit the painted space. Suitable for painting spaces in the health, public food, education, industrial, commercial sectors. Technical data Technical data Classification in accordance with the UNE-EN 13300 standard Deep matt gloss EN ISO 2813 Size of fine particles RO 21524 Resistance to friction in wet condition Class 2 ISO 11998 Additional technical data Theoretical coverage 6 m2/l Corresponds to approximately two layers of finish. ISO 6504-3Density 1.610 ± 0.001 g/ml EN ISO 2811-1Viscosity 22000-24000 mPa.s (20 rpm, R6)Solids in volume 48% ASTM D 2196-10Berger white 85 EN ISO 23811Classification according to fire behavior B-s1, d0 UNE 48073GeneralThe surface must be compact, dry, free of dust, salts, loose or loose parts or any other type of contamination that could affect the adhesion of the system. The resistance of the substrate must be checked. Regardless of the substrate to be painted, the appearance must be homogenized and any differences in texture, gloss, absorption, etc. must be corrected. New works Type of substrate: plaster mortars, plasterboard, concrete, fiber cement and other construction materials Substrates in normal conditions: It is not necessary to apply a previous primer coat. Very porous and/or absorbent substrates: apply a primer coat TK-5908 Tkrom Fijativo F4, to prevent excessive absorption during subsequent painting. Solid and smooth surfaces with low absorbency: Apply a coat of TK-5907 Tkrom Fijativo F1 as a pre-coat. In cases where the absorption power of the substrate is very low, it is recommended to sand the surface to open the pores. Application conditions Substrate temperature Min. +5ºC / Max. +35ºC / +35ºCAmbient temperature 5ºC / 35ºCSubstrate humidity Dry, damp substrate Dew point Substrate must be at least 3°C ​​above dew point to reduce the risk of peeling or efflorescence of the coating on walls and floors due to condensation. In conditions of high ambient temperature and low humidity, the likelihood of efflorescence on the product finish increases. Application instructions Method of application Can be applied by brush, roller and spray Can be applied by brush, short-hair roller or airless spray The second layer of product must be applied perpendicular to the first layer to achieve optimal opacity. Dilution Maximum dilution 10%. Dilutions higher than 10% will not allow the non-drip property to be obtained during application.Cleaning tools Clean tools with water immediately after use.Drying times Drying at 20°C and 65% relative humidity: The product does not stain after half an hour and can be recoated after 2-3 hours. The total drying time is 15-20 days. Additional information For any information regarding safety aspects in the use, storage, transport and disposal of this product, users should consult the label and the latest version of the safety data sheet, which contains physical, ecological, toxicological and other relevant data. Material Safety Data Sheet: MSDS-5213 LER CODE: 08 01 12 RESIDUES: NON-HAZARDOUS The EU limit value for VOCs for the product of category A/a is 30 g/l, the maximum content of this product is 30 g/l in accordance with Directive 2004/42/II Classification A. Storage Storage must be done in a cool and dry place, in their original containers, tightly closed and undamaged, and protected from frost and direct sunlight. The stability of the product in its original unopened containers, at ambient temperatures not exceeding 30°C and not less than 5°C, is 24 months from the date of manufacture. Wholesale product available on the B2B marketplace, Supreva Market For Business, at wholesale prices directly from the importer.