Special Offer BeneluxDecor TkRom INTERIOR PAINT CLASS 2 GONDOLA, wholesale Supreva, Tkrom, Premium, News, Promotions, Produced in Europe

Description Matte plastic paint based on an aqueous dispersion of acrylic copolymers, with a matte-silky finish. It has excellent adhesion to various materials used in construction, is easy to apply, has good opacity, performance and washability. Excellent coverage and performance. Matt and silky finish. Very good washability. EPD - DAPA certified paint. This documentation can be used to obtain building sustainability certifications such as LEED or BREEAM. Please refer to the EPD - DAP certificate in the product's technical documentation. Scope Decorative and protective coating for interior and exterior. Suitable for use on plaster and plaster mortars, walls, partitions, pillars, grouting, plasterboard, concrete, brick, fiber cement and other building materials. Both for new construction and for maintenance.Technical data sheet Classification according to UNE-EN 13300 standard Gloss 9 ± 2 EN ISO 2813 Particle size Fine EN 21524 Wet friction resistance Class 2 ISO 11998 Additional technical data Theoretical coverage 10-12 m²/L - 40 µm dry EN-ISO 23811 Density 1.61 ± 0.05 g/ml EN ISO 2811-1 Solids in volume 45% ASTM D 2196-10 Berger Whiteness 92 ± 2 EN ISO 23811 Classification according to fire behavior B-s1, d0 UNE 48073 General The surface must be compact, dry, free of dust, salts, pieces loose or poorly adhered or any other type of contamination that could affect the adhesion of the system. The strength of the substrate must be checked. Regardless of the substrate to be painted, the appearance must be homogenized and any differences in texture, gloss, absorption, etc. must be corrected. Application conditions Substrate temperature Min. +5ºC / Max. +35ºC Ambient temperature 5ºC / 35ºC Substrate humidity Dry substrate with moisture The substrate must be at least 3ºC above the dew point to reduce the risk of peeling or efflorescence of the coating on walls and floors due to condensation. In conditions of high ambient temperature and low humidity, the likelihood of efflorescence on the product finish increases. Application instructions Method of application Can be applied by brush, roller and spray Can be applied by brush, roller with short hair or airless spray The second layer of product must be applied perpendicular to the first layer to achieve optimal opacity. For airless spray, use the following: pressure ~150 bar, nozzle ~0.38-0.53 mm, application angle ~50°-80°. Dilution Maximum dilution 10%. Dilutions greater than 10% will negate the property of not spreading during application.Cleaning tools Clean tools with water immediately after use.Drying times Drying at 20°C and 65% relative humidity: The product does not stain after half an hour and can be recoated after 4-6 hours. Total drying time 21 days. Additional information For any information regarding the safety of use, storage, transport and disposal of this product, users should consult the label and the most recent version of the material safety data sheet, which contains physical, ecological, toxicological and other relevant data. EU limit of VOCs for the product in category A/a is 30 g/l, the maximum content of this product is 30 g/l. according to Directive 2004/42/II Classification A. Storage Storage must be done in a cool and dry place, in their original containers, well closed and undamaged, and protected from frost and direct sunlight. The stability of the product in its original unopened containers, at ambient temperatures of no more than 30°C and no less than 5°C, is 24 months from the date of manufacture. Tariff position TARIC Code: 3209 10 00NOTE The technical information presented in this document, as well as recommendations regarding the application and use of the product, are given in good faith, based on current knowledge of the product, laboratory tests and practical use under normal conditions of storage, handling and application. Full reproduction of the data provided is not guaranteed for each specific use, the user of the product must test the suitability of the product according to its end use. Wholesale product available on the B2B marketplace, Supreva Market For Business, at wholesale prices directly from the importer.