Special Offer BeneluxDecor TkRom 2C EPOXY PAINT, wholesale Supreva

Description Two-component epoxy paint, based on polyamidoamine epoxy resins and very solid pigments. When dry, it forms a glossy, hard and elastic film, highly resistant to weathering (see product application data) and dilute solutions of acids and bases, which makes it particularly suitable for use in interior paving. Available in tintometric Area of ​​application Finishing epoxy with high chemical and mechanical resistance, which provides high protection against carbonation on interior concrete or cement surfaces, both horizontally and vertically. Its high resistance to anticorrosive cycles also makes it particularly suitable for treating metal surfaces. Metal. Interior floors. Additional technical data Theoretical coverage 7-9 m²/L - 4-6 m²/kg at 70µm dry EN-ISO 23811 Classification according to fire performance Bfl-s1 UNE 48073 General The surface must be compact, dry, free of dust, salts, loose or loose parts or any other type of contamination that could affect the adhesion of the system. The strength of the substrate must be checked. Regardless of the substrate to be painted, the appearance must be homogenized and any differences in texture, gloss, absorption, etc. must be corrected. Application conditions Substrate temperature Min. +5ºC / Max. +35ºC Ambient temperature 5ºC / 35ºC Application instructions Application method Can be applied by brush, roller, spray gun or airless spray gun. For brush or roller application dilute 0-10% with Epoxy Thinner Tkrom 370 TDS-6919. For spray gun application dilute to a viscosity of 28-32 seconds Ford Cup N-4, with 10-20% of the same thinner. For airless spray application, dilute to a 60 second viscosity Ford Cup N-4, with 5-10% of the same thinner. Dilution Maximum dilution 10%. Dilutions greater than 10% will not allow the product to be sprayed during application. Cleaning of tools Used tools should be cleaned immediately after use with any of the solvents recommended for dilution or with TKROM SOLVENT 302 UNIVERSAL (TDS-6961). Drying times Drying at 20ºC and 65% relative humidity: The product dries to powder in 45 minutes. Drying without glue 2-3 hours. Deep drying 24 hours. Total cure of 7 days. It can be recovered after 12 hours. Additional information For any information on safety aspects in the use, storage, transport and disposal of this product, users should consult the label and the latest version of the safety data sheet, which contains physical, ecological, toxicological and other relevant data. of VOCs for the product in category A/a is 30 g/l, the maximum content of this product is 30 g/l. according to Directive 2004/42/II Classification A. Storage Storage must be done in a cool and dry place, in their original containers, well closed and undamaged, and protected from frost and direct sunlight. The stability of the product in its original unopened containers, at ambient temperatures of no more than 30°C and no less than 5°C, is 12 months from the date of manufacture. Tariff position TARIC Code: 3208 90 91NOTE The technical information presented in this document, as well as recommendations regarding the application and use of the product, are given in good faith, based on current knowledge of the product, laboratory tests and practical use under normal conditions of storage, handling and application. Full reproduction of the data provided is not guaranteed for each specific use, the user of the product must test the suitability of the product according to its final use.https://www.benelux-decor.com/epoxi Wholesale product available on the B2B marketplace, Supreva Market For Business, at wholesale prices directly from the importer.