Special Offer BeneluxDecor TkRom INTERIOR PAINT CLASS 1 ULTRA MAT, wholesale Supreva, Tkrom, Premium, News, Promotions, Produced in Europe

Description Plastic paint for exterior and interior, based on ethylene and vinyl copolymer in aqueous dispersion, with a very low odor. TKROM-ULTRAMAT is a product with excellent opacity and whiteness, very easy to apply and with a matte, non-reflective, highly decorative finish.Available in anti-mildew version.Field of applicationFor all types of wall surfaces, especially in smooth finishes, to which it gives great beauty thanks to its total matte appearance, seen both at an angle of 60º and at 85º, without reflections. Masonry surfaces. Inside and outside. Extremely decorative finishes. DIY in general. Technical data Technical data Classification according to the UNE-EN 13300 standard. Gloss Particle size 35-45 microns / Fine EN 21524 Resistance to wet rubbing 3.9 microns / Class 1 ISO 11998 Additional technical data Theoretical coverage 8-10 m²/L - 5-7 m²/kg at 50µm dry EN-ISO 23811Density 1.51-1.54 g/ml EN ISO 2811-1Solids in volume 47-49% ASTM D 2196-10Berger blue 91-93 EN ISO 23811GeneralThe surface must be compact, dry, free of dust, salts, loose or poorly glued parts or any other type of contamination that could affect the adhesion of the system. The strength of the substrate must be checked. Regardless of the substrate to be painted, the appearance must be homogenized and any differences in texture, gloss, absorption, etc. must be corrected. Application conditions Substrate temperature Min. +5ºC / Max. +35ºC Ambient temperature 5ºC / 35ºC Substrate humidity Dry substrate with moisture The substrate must be at least 3ºC above the dew point to reduce the risk of peeling or efflorescence of the coating on walls and floors due to condensation. In conditions of high ambient temperature and low humidity, the likelihood of efflorescence on the product finish increases. Application instructions Method of application Can be applied by brush, roller and spray Can be applied by brush, roller with short hair or airless spray The second layer of product must be applied perpendicular to the first layer to achieve optimal opacity. For airless spray, use the following: pressure ~150 bar, nozzle ~0.38-0.53 mm, application angle ~50°-80°. Dilution Maximum dilution 10%. Dilutions greater than 10% will negate the property of not spreading during application.Cleaning tools Clean tools with water immediately after use.Drying times Drying at 20°C and 65% relative humidity: The product does not stain after half an hour and can be recoated after 4-6 hours. Total drying time 28 days. Additional information For any information regarding the safety aspects of the use, storage, transport and disposal of this product, users should consult the label and the most recent version of the safety data sheet, which contains physical, ecological, toxicological and other relevant data. NON-HAZARDOUS The EU limit value of VOCs for the product in category A/a is 30 g/l, the maximum content of this product is 30 g/l. according to Directive 2004/42/II Classification A. Storage Storage must be done in a cool and dry place, in their original containers, well closed and undamaged, and protected from frost and direct sunlight. The stability of the product in its original unopened containers, at ambient temperatures of no more than 30°C and no less than 5°C, is 24 months from the date of manufacture. Tariff position TARIC Code: 3209 10 00NOTE The technical information presented in this document, as well as recommendations regarding the application and use of the product, are given in good faith, based on current knowledge of the product, laboratory tests and practical use under normal conditions of storage, handling and application. Full reproduction of the data provided is not guaranteed for each specific use, the user of the product must test the suitability of the product according to its end use. Wholesale product available on the B2B marketplace, Supreva Market For Business, at wholesale prices directly from the importer.