Strips for professional teeth whitening, SHINE, 28 strips, without peroxide

Teeth up to 8 shades whiter in just 14 days! The strips are made of transparent, thin flexible pieces of plastic (polyethylene), which have been covered on one side with a thin layer that does not contain hydrogen peroxide, being in accordance with EU legislation. This layer works both as a whitening agent and as an adhesive through which the strips will stick to the teeth. The strips contain the same whitening agent used by dentists in their offices, and in the whitening process they do not affect the enamel! The advantage of the design in the form of a strip Compared to other effective home whitening methods, this form is probably the simplest and cleanest method to whiten your teeth. Considering that the whitening agent is applied by the manufacturer, the dose applied is controlled and will always be the same. As a result, the expected results are obtained and the risk of side effects is minimized. Due to the fact that only part of the strip is covered by the whitening agent, the strip itself will act both as a barrier preventing the dilution of peroxide in saliva, and as a means of minimizing the contact of the whitening agent with the soft tissues of the oral cavity. This helps to maximize the effectiveness of whitening and decrease the occurrence of side effects. How are whitening strips used? The tapes are extremely simple to use! Peel off the tape for the upper teeth and position it over the teeth, without covering the gum, then gently press it with your fingers to mold it perfectly on the surface of the tooth. The excess tape is folded over the inner part of the tooth. Repeat for the strip intended for the lower teeth. After 30 minutes pass, the tape easily peels off the teeth and is thrown away. . Other information that we consider very important for the treatment to be successful! It is very important to respect the recommended period of application of the strips and not to keep them on the teeth for longer, because this will not lead to stronger whitening of the teeth, but on the contrary, it could create sensitivities. Also, before applying the strips, the teeth should not be washed with toothpaste, because the fluoride in the toothpaste will cancel their effect. Before application, the teeth are cleaned with a toothbrush, water and dental floss. After removing the strips, you must wash with toothpaste to remove the gel left on the teeth. In the event that sensitivities occur, although it is very unlikely, we recommend you to take a break for a day and then resume the treatment. They will disappear completely after finishing the treatment.