Sterilizing device for manicure and pedicure utensils with quartz balls, wholesale Supreva, White, Sterilizer

STERILIZER Utensils Manicure/Pedicure with Quartz Balls Quartz balls are a very good thermal conductor, distributing the temperature evenly over the entire surface of the instruments to be sterilized, maintaining a temperature of 250 degrees Celsius. INSTRUCTIONS FOR USE: - Connect the device to electricity, (the red LED will light up), pour the quartz balls into the tub, insert the utensils to be sterilized into the tub, close the lid and put switch (I/O) in the on position (I). The device will start to heat up (the green LED will light up) until it reaches the working temperature, which will be automatically maintained by the device. The heating process from ambient temperature to 250 degrees Celsius takes approximately 12 minutes. When the temperature has reached 250 degrees Celsius, about 30 seconds are needed to sterilize the instruments. ATTENTION!!! Do not extract the instruments until you make sure that they have reached a bearable temperature so that you can handle them without injuring yourself. Do not forget that inside the tub the instruments reach a temperature of 250 degrees Celsius! MAINTENANCE: Clean the device as often as necessary with a damp cloth. Make sure that during the cleaning process the device is not connected to electricity. Do not put liquids in the tub! Keep the device in places away from moisture. Wholesale product available on the B2B marketplace, Supreva Market For Business, at wholesale prices directly from the distributor.