Module for automatic inclusion - for high beams with percentages

Module for automatic inclusion of high or low beams with reduced light intensity from 20% to 80%. Features of the module: "-DIS" input (white cable) is for disabling the module from the light switch ("headlights" position) on vehicles with "minus" control. Input "+DIS" (black) is for disabling with +12V, for example from the gauges. After turning on the contact switch "+12V" (brown), the module turns on the lamps after the voltage is above 13.2V and the time delay of 5 seconds has expired. If the car installation does not have separate circuits for left/right headlight, outputs 5 can be connected in parallel. The reduction of the voltage on the lamps (usually high beams) is done with a trimmer potentiometer on the front of the box. Recommended range is (20%-50%). The factory setting is 20%. Box size: 40x28x22mm Allowable output power: 120W (2x60W). There is no short circuit protection in the device! Always use a fuse before direct connection to 12 volts Consumption with ignition switch off: 0mA Warranty: 6 months