Flow water heater ELDOM E42

- For installation in kitchen rooms and in rooms without an available hot water installation. They are installed at the point of use.- Fully equipped for installation. You don't have to buy an additional mixer tap or hoses. - Compact dimensions. - It heats the water the moment it passes through the unit, so the possibility of heat loss from the water container is completely eliminated. - Very easy installation - Mounts directly to a plumbing pipe for cold water. - Metal mixer tap with ceramic head and ergonomic winch. - Power 3.5 kW - Illuminated moisture protection switch. - Complete with cord and "Shuko" plug. - Works on single-phase current.- Four degrees of protection: 1. Protection against electric shock - all current-carrying and metal elements of the water heaters are connected by zeroing wires, with a protective terminal on the device. 2. Protection from overheating of water by adjusting the temperature interval of heating - factory-set thermoregulating devices are installed in the water heaters, which automatically maintain the water temperature within certain limits. After reaching the set temperature, the thermostat cuts off the supply circuit of the heater. 3. Protection against a drop in pressure in the water supply network - the water heaters are equipped with a reliable protection system, with the help of which the heaters are not switched on in the event of a drop in pressure or a stoppage of water in the water supply network. 4. Protection against excess pressure - a special valve is built into the devices, protecting the structure from a possible increase in the water pressure in the water container above a certain value.