Carmotion Rectifier, 12 / 24V, 30A / 20A, Start Function 180A MAX, 58701, AUTOEXPRESS

1000052795 EAN 5904378587017 The charger is intended for charging one battery. Technical data: additional pocket that allows you to hide the cables made of a metal body BOOST system (fast charging) output voltage is: 12 / 24V DC input voltage is: 230V 50-60Hz charging current: 45A battery capacity: 20- 350Ah surge protection and thermal switch charging cables with plus/minus terminal IP20 degree of protection Package includes user manual. Carmotion Car charger with jump-start function - convenient and safe battery maintenance The wide range of car rectifiers available on the market allows you to choose good and efficient products. However, it is worth taking a closer look at the individual accessories. Carefully check their technical parameters and compatibility with the type of battery we have. When choosing the right charger, there are a number of guidelines to consider in terms of battery type, charging current, output voltage and device weight and dimensions. The latter affect the comfort of use and are not insignificant in frequent use. Fully functional batteries rarely require a backup. However, their performance decreases with time. This state of affairs is affected by changing weather conditions. Often in winter we are forced to use additional charging. You can learn more about the necessary winter car accessories from our blog. The Carmotion car charger is a multi-functional practical device, with which you can successfully recharge the battery with a nominal voltage of 12V and 24V and provide the energy necessary to start the power unit with a maximum current of 180A. Thanks to such complex parameters, the charger can be used to charge batteries in motorcycles, cars and trucks. The unit has all the necessary surge protection and a thermal switch. The product is made of high quality materials, with attention to detail and practical aspects of use. The charger has the form of a convenient, easy-to-carry box with a pocket for storing cables. The Carmotion loader is a multifunctional, convenient and easy-to-use solution. On the body of the device there are all the necessary buttons, switches and markings. Technical parameters of the Carmotion battery charger The charging current of the device is 12 / 24V. The charger is powered by a 230V / 50-60Hz socket. The peak charging current is 45A. The Carmotion charger is suitable for charging batteries with a capacity of 20-350Ah, and the nominal charging current is 20 / 30A. The maximum starting power consumption is 180A and the rated starting current is 130A. The device has a degree of protection IP20. In response to market needs and diverse consumer requirements, the Carmotion brand offers high-quality automotive devices and accessories that assist drivers in various road situations. The charger presented and available in our store meets the highest safety standards and technical requirements for this type of device. What you should Know, before buying a suitable car charger? Before purchasing a suitable charger, carefully check all the technical parameters of the device and their compatibility with the target battery. The type of battery is very important. Let's check whether it is lead-acid or gel and from this angle choose the type of rectifier. The output voltage assigned to the charger must be the same as the battery rating. If the battery generates a voltage of 12V, the charger must have an output voltage of 12V. The effective value of the charging current is also an important parameter. It should be one tenth of the battery capacity. Pay attention to the manufacturer's description and the instructions provided therein. If we do not choose these values ​​correctly, the battery will not be fully charged or will be destroyed. Some manufacturers provide a maximum or peak charge current value. However, this is not an optimal value, only a short-term one. In other words, the rectifier cannot reach this value for the entire time of operation, but only at its peak, short moment. The same is the case with the charging function of the chargers. The maximum inrush current is always greater than the rated current, i.e. established for the electrical device used as intended. Only the correct use of individual devices will allow them to use their full potential and will not interfere with the work of other connected components. TECHNICAL DATA: Supply voltage: 230 V / 50-60 Hz Output voltage: 12/24 V DC Load current: 45 A. Rated charging current: 20/30 A Maximum starting power consumption: 6, 4 kW 180 A inrush current Nominal inrush current: 130 A Battery capacity: 20-350 Ah Number of charging stages: 2 Degree of protection: IP 20 DEVICE ELEMENTS: 1-Ammeter 2-Charge/start switch 3-Switch for battery voltage 12 or 24 V 4-Fuse 5-Switch for normal/boost charging mode Charging cables with plus/minus terminals Mains power cable Main switch 2x spare fuse Engine start function The rectifier is equipped with a start function. It should not be started without the battery installed in the vehicle due to possible damage to its electrical system. To start the BOOST function: CAUTION! Before using the device in Start mode, charge the battery for a minimum of 15 minutes in Charge mode - connect the charger to the battery in the same way as when charging, the rectifier waits to send the starting charge to the vehicle, - turn the key in the ignition of the vehicle until it starts, but not more than 3 seconds - then wait a minimum of 120 seconds before making another attempt to start the engine - It is recommended that you make a maximum of 5 attempts to start the engine. - if after repeated attempts, the vehicle engine has not started, change the operation function of the rectifier from START to CHARGE - after starting the engine, first disconnect the power cable of the rectifier,