Boiler TESY EV7/5 S2 200 60

High -volume boiler with 2 coils for floor mounting 200l installation of electric heater Insulation (hard PU): 50mm Area of ​​heat exchanger S1: 0.75m2 Area of ​​heat exchanger S2: 0.54m2 Nominal volume of heat exchanger S1: 4.6l. Nominal volume of heat exchanger S2: 3.3l. Exchanged power in continuous mode ( max. coil power) 60-80 / 70-90*C S1: 23/30kW Exchanged power in continuous mode (max. coil power) 60-80 / 70-90*C S2: 13/20kW Continuous DHW flow rate at ΔT 35°C (S1) 60-80 / 70-90*C S1: 558/648 l./hour Continuous DHW flow at ΔT 35°C (S1) 60-80 / 70-90*C S2: 318/468 l ./hourMaximum amount of water drained MIX 45°C (15-60°C), power supply S1 off: 225l.Maximum amount of water drained MIX 45°C (15-60°C), power supply S2 off: 111l.Heat losses ΔT 45K: 1.4kWh / 24 hours Energy class: BMaximum working temperature: 95*СMaximum working pressure: 8 barMaximum working pressure of the heat exchanger: 6 barMinimum heating time 80°C 15/60°C S1: 39min.Minimum heating time 80° C 15/60°C S2: 39 min. Sleeves for thermal sensors: 2 pieces. Dimensions Ø x Height: 600 x 1200 mm. Weight: 70 kg. The electrical installation kit is purchased separately.95*СMaximum working pressure: 8 barMaximum working pressure of the heat exchanger: 6 barMinimum heating time 80°C 15/60°C S1: 39min. 2 piecesDimensions Ø x Height: 600 x 1200 mmWeight: 70 kg. The electrical assembly kit is purchased separately.95*СMaximum working pressure: 8 barMaximum working pressure of the heat exchanger: 6 barMinimum heating time 80°C 15/60°C S1: 39min. 2 piecesDimensions Ø x Height: 600 x 1200 mmWeight: 70 kg. The electrical assembly kit is purchased separately.