Boiler standing Eldom FV10010IFS2, 12 kW, stainless

ENERGY SAVING - with two corrugated AISI 316L stainless steel coils for combined use of two heat sources. Significant electricity savings can be achieved by appropriately combining heating modes in each season. The upper coil works in flow mode and is connected to a boiler or fireplace with a water jacket; the lower coil works in accumulator mode and is suitable for connection to a solar collector or a heat pump. - the copper surface of the coils provides 15% better heat exchange; - sensor sockets for each heat exchanger - the installation of thermal sensors allows the precise management of the heating system and its economic functioning; - thermal insulation from expanded polyurethane foam with a thickness of 125 mm, ensuring extremely low heat losses and economical means; Casing made of synthetic wear-resistant material in INOX color. WITH LONG LIFE - water container made of stainless chrome-nickel alloyed steel AISI 316L. The content of molybdenum (Mo) gives this steel additional strength and durability; SAFE - with unique protection; Circulation sleeve; Thermometer; Electric tubular heater, specially designed for this model and manufactured using the latest generation technology. Technical data With mechanical control Water tank: stainless Volume group 1000 Nominal voltage [V]: 400V 3N~ Nominal power 12 kW Nominal pressure 0.6 MPa Water heating method: electric heater + two heat exchangers MIX 40ºC with electric heater 2520 l Area of ​​heat exchangers 2.6/3.6 m2 Pipe diameter (water supply network/heat exchanger): 1" - 1 1/2" Overall dimensions ØxH [mm]: