AlMar Protective Face Mask KN95 - FFP2, Wholesale Stocks

The professional FFP2 medical mask by "LazerPin", Italy is five-layered and filters over 96% of inhaled and exhaled air, thus providing an exceptional degree of protection, both for the user and for those around them. It is intended to protect against viruses, bacteria, spores, harmful solid and/or liquid particles and aerosols. It has a metal clip on the nose for a better fit to the face. According to WHO Guidance, FFP2 masks are used to protect medical personnel when performing procedures such as intubation, ventilation and bronchoscopy of patients with Covid-19. The level of protection of the mask meets the European Union standard CE EN 149:2001+A1:2009 (Regulation 2016/425). Instructions for use: • With clean hands, check the mask for damage, dirt, missing parts. Do not use damaged masks. To fit the mask, grasp the elastics and place them behind your ears so that the mask tightly covers the nose, mouth and chin. Press the safety clip to the shape of your nose and face. Make sure there are no gaps between the face and the mask. Beards and mustaches interfere with the snug fit and reduce the mask's protection • When working with viruses, do not touch the mask while using it. If you still have to, clean your hands beforehand with rubbing alcohol-based disinfectant or soap and water according to WHO recommendations. • Do not use the mask when there is a lack of oxygen (below 17% of the volume) - rooms with poor ventilation, small spaces and narrow passages, due to the risk of suffocation; in an atmosphere in which there are impurities in the form of toxic gases and/or vapors of substances, due to the risk of poisoning; at too high a temperature above +40°C, or too low below - 20°C and in conditions of air humidity above 90%, due to the risk of losing the protective properties of the mask. • Do not wear the mask "upside down" because it will not protect you. If you use the mask at the same time as other types of personal protective equipment (goggles, hats, headphones), when putting them on, be careful not to break the tight fit of the mask to the face. • Masks must be stored in undamaged, closed packaging, at a humidity below 90% and a temperature of -20°C to +40°C and protected from direct sunlight, heat, aggressive chemicals and mechanical damage. The maximum storage time under the required conditions is 36 months. Changing the mask: • When used in infectious disease departments, doctor's and dentist's offices, the mask should be used for up to 8 hours and discarded. • For daily use, the mask can be hand washed with soap or washing powder, disinfected with alcohol, oxygen water, UV lamp, steam 120°C and others. Thus, the operating period can be extended to another 10 cycles of 8 hours. However, for maximum protection it is not recommended to use more than 5 - 6 cycles of 8 hours each. The mask is recommended by the WHO for medics working with Covid-19 and is CE EN 149:2001+A1:2009.Wholesale product available on the B2B platform Supreva Market For Business at wholesale prices directly from the distributor.