13" Bis Ring decorative wheel set (4 pieces)

In terms of its function, the decorative wheel makes the disc rim more aesthetic, and thus the appearance of the entire car changes and beautifies. In addition to enhancing the aesthetic appearance, it somewhat protects the rim from minor stone impacts and external, lateral impacts. Our company distributes three Polish rims of different quality and appearance (Jestic, Argo, Jacky), the entire range of which we offer from stock. Argo rims have been found on car rims for more than 35 years. Since then, of course, many product developments have taken place, which is reflected in both the material quality and the design. It represents premium quality on the decorative disc market. Argo rims constantly follow the latest alloy wheel trends, so the range is expanded with new types every year. The manufacturing company has the ISO 14001 environmental management certificate and the 9001 quality assurance certificate. For customers who like a sportier, more challenging look, the decorative disc brand with the Jacky brand name is an excellent choice. The decorative discs produced by the Jestic company have undergone significant renewal over the years. During its 30 years of operation, the company mostly produced classic models, but now they follow the latest alloy wheel trends. Thanks to innovation, the company offers a wide range for all motorists who value a quality product at an affordable price. The products of both companies fit perfectly with rims, are durable, aesthetic and put a lot of emphasis on environmental protection during their production. The marketed decorative discs are typically available in all sizes from 13" to 17". Thus, we offer no less than 180 decorative discs with different appearances. We also sell factory rims for Skoda models. Be sure to check the rim size before buying! In all cases, it is necessary to perform the following tasks. Installation guide. - Do not open the product from the nylon packaging until you are sure that you have indeed ordered the size and type that is suitable for the rim. If a wrong order has been made, we can only take back a product with intact packaging. - Before installation, clean the steel rim of larger, deposited dirt. - Before snapping it on, make sure that the part formed for the valve cap on the decorative disc, really get there (of course, for decorative discs where this is not provided, it is of no importance there). - Do the snapping in a circle so that the next one is next to the claw that was snapped first. - If it is possible to choose a lower or upper diameter on the inner side of the nails of the decorative disc (typically in the case of Argo types), then this should be taken into account. In the first instance, it is recommended to snap the metal ring onto the upper fixing points and try it on the rim. If it turns out to be loose (the decorative disc can easily be turned on the rim), the metal ring must be lowered and tried on. - In the event that the decorative disc on the rim still rotates easily, the valve design of the metal ring must be manually adjusted to a larger diameter. Unfortunately, there are some aftermarket rims whose design differs from the factory one, and in this case it is not possible to fasten the decorative rim well and safely in any other way. - In the event that the decorative disc does not tighten well even in this way, unfortunately your rim is not suitable for the decorative disc to be securely mounted. Presumably, the quality of the rim and its design are inadequate. In such a case, none of the manufacturers represented by us can accept the resulting warranty claim, including our company. Fortunately, based on our experience, this is very, very rare, measured in thousandths. To make it easier to understand, by clicking on the link below, we also show the steps described above in a video. - In the event that the decorative disc does not tighten well even in this way, unfortunately your rim is not suitable for the decorative disc to be securely mounted. Presumably, the quality of the rim and its design are inadequate. In such a case, none of the manufacturers represented by us can accept the resulting warranty claim, including our company. Fortunately, based on our experience, this is very, very rare, measured in thousandths. To make it easier to understand, by clicking on the link below, we also show the steps described above in a video. - In the event that the decorative disc does not tighten well even in this way, unfortunately your rim is not suitable for the decorative disc to be securely mounted. Presumably, the quality of the rim and its design are inadequate. In such a case, none of the manufacturers represented by us can accept the resulting warranty claim, including our company. Fortunately, based on our experience, this is very, very rare, measured in thousandths. To make it easier to understand, by clicking on the link below, we also show the steps described above in a video. based on our experience, this is very, very rare, measured in thousandths. To make it easier to understand, by clicking on the link below, we also show the steps described above in a video. based on our experience, this is very, very rare, measured in thousandths. To make it easier to understand, by clicking on the link below, we also show the steps described above in a video.